Some more Manon during the small flash workshop
Today some more images shot during the small flash workshop with Manon.
Light : Phottix Mitros+ strobe fitted with the Rogue Flashbender striplight with grid.
Model : Manon
Dresses : Part Sinister
Tag Archive for: small flash
The Elinchrom FS30 as a prop
During the small workshop from last week we did one setup where I used the Elinchrom FS30 as a prop.
We lit Manon with the modeling light of an ELC 1000 strobe.
To give accent to the side of the FS30 I used one Lastolite Switch box II Large fitted with a Phottix Mitros+ strobe.
To light the smoke a bare strobe was used, also a Phottix Mitros+.
Both strobes were balanced with a Rogue CTO gel to balance them towards the modeling light of the ELC.
In post I tinted the images with a blue tint.
Small flash and the sun
Tip:
Small flash is often regarded as “not powerful enough” but this is not true. Compared to the big strobes it might look that way however with the small flash system you can use something called HSS (High-Speed-Sync) and that makes it possible to shoot on much higher shutter speeds than with for example studio strobes or battery powered solutions.
There are limitations.
Because the strobe “strobes” you will find that the light output is much less, but this is often countered by the higher-shutterspeed, but also recycling is much slower.You can of course add 2 strobes together for 1 stop more (add 2 more for another stop).
Outside with small flash using the sun
One of the things that I love to do is including the sun in the frame.
Often photographers are afraid to do this, for…. well I don’t know.
During the small flash workshop we always try to do one set outside to create something that a lot of people think is not possible with the small flash system, a day to night scene.
The nice thing about small flash is that there is an option where you can use something called “HSS” High Speed Sync.
With this option you can shoot on higher shutter speeds than with studio strobes (which are almost always limited to 1/125), meaning it gets easier to “push away” the ambient light.
By adding two strobes together you get 1 stop more of power plus recycling etc. is much faster.
The following shots were done with this technique during the small flash workshop.
You must be logged in to post a comment.