Tag Archive for: rogue

Using two or three umbrellas for a perfect white background a video tutorial

The white background

Is often one of those backgrounds we all use once in a while, and some have even build a complete career around it.
When I started out with my learning process I was lucky enough to find out about Dean Collins so I started using a lightmeter almost immediately which makes setting up a white background (and everything else) a lot easier and faster. But still I ran into a lot of problems.

Over the years I’ve tried different ways to shoot this setup.
At one point I was using two strobes on the background, two strip lights as accents and one main light.
The problem always was the floor. The accent lights would give double shadows, this by the way was solved by angling the strip lights slightly up and using grids, but that didn’t solve my other problem, the floor itself.

The miracle of plexiglas

When using the standard setup the main issue was always the floor.
The background would be nice and white, the model was perfectly lit, the accents were nice, but the floor….
You can do it in Photoshop but then you have to edit every single shot, plus it looks the model is floating, so I added some shadows.. and realised it must be possible to do it faster and easier.

Enter, Plexiglas.
By placing transparant plexiglas on the floor you can redirect the light and create a perfect white background which seamlessly blends in with the background, it’s a simple trick of reflections. And the cool thing… you can also use transparant plexiglas on other colors, it’s always giving an awesome reflection.

I’ve talked about this extensively in this blogpost, but today I also show you in the video how I use three and even two umbrellas to create the perfect white background for a full body model including accents… yeah it’s really possible and super easy (and cheap).

Gear used :
3x Geekoto GT400
1x Rogue travel kit with the black umbrella and sleeve (main light) and the white umbrella.
1x Rogue white umbrella.

The nice thing about the Rogue umbrellas is that they are made of Fibreglass which makes them very durable and super easy/light to setup.

In this video I show you how the setup works.

 

 

A pure white background and floor, plus accents on your model with just three umbrellas

A white background, floor, and accent on your model with just 3 umbrellas?

Seems impossible… it’s not

Shooting with a white background and floor is far from my favorite setup, but sometimes you have to 😀
When I started with photography the white background was hot. And used all the time (I was always more of a light grey fan). So of course I had to learn how to shoot it.

The first problem I ran into was getting the background completely white.
This is easily solved by moving the model forward and just blasting the background. But when cameras became better and the headroom larger it became more and more problematic due the the enormous amount of light reflecting back from the background. So how to get that pure white background?

Special modifiers to get a white background

The first thing I tried was of course lighting the background with open reflectors, or softboxes. And although it worked ok it never was 100%.
So enter the special background reflectors.
The idea behind these is that they “focus” the light on the background and spread it out evenly.

a modifier which makes it easier to get a white background.

By the way, it’s more easier if you have two of those.

And although it worked a lot better than a standard reflector it’s far from perfect.

The solution(s). How I made a white background and floor

Floor

So let’s not make the blog post too long and immediately jump to the solution.
Let’s start with the floor.

Without a doubt, this one was the most difficult to crack.
You can use extra strobes on the floor. But that also meant the light fall off on the model would look unnatural with loads of light on the feet.
You can use Photoshop of course. But that would mean the model just floats in the air, so you can start adding shadows again. Long story short this is not doable when you need to deliver 50 images to a client. You simply can’t edit every single image in detail unless you have a very large budget.

The solution is actually super simple and gives an awesome effect.
Just put some transparent plexiglass on the floor.
The plexiglass will reflect the light and give you an instant perfect white floor and as a bonus a great reflection.
The added bonus when using transparent plexiglass is that you can also use it on other color backgrounds and get some stunning reflection effects. But for today let’s keep it on white.

Now that we have the floor covered (pun intended) we have the background to light.

Background

For this, the solution is actually much simpler and cheaper than you might think.

white background, white floor and accent on your model

 

Here you can see the setup we used for the shots with Claudia from the previous blog post.

Umbrellas for a white background and floor

As you can see I’m using two white Rogue umbrellas, on our Geekoto GT400 strobes, at the back. And these are more important than you might think at first sight.
The placement of those two is vital for the end result and also gives you a lot of flexibility.

The first task for the umbrellas in the back is of course lighting the background and floor. So they are placed behind the model aimed at the background with the shoot-through part. However, a white umbrella also reflects so we have a light source that’s pretty unique. It lights both what’s in front but also what’s in the back, and that’s actually the whole secret or trick in this setup.

By choosing the right angle of the back umbrellas it’s possible to light both the background and also give a very accent light on the model.
In loads of setups, you can see 2 strobes on the background and 2 strobes as accent plus your mainlight which means you need 5 strobes for one setup.
By using umbrellas you can bring this back to just 3 strobes, and also the costs are considerably lower than using background reflectors and for example striplights as accents.

For example, we sell the Rogue fiberglass umbrellas in a nice travel kit edition with a black umbrella plus sleeve (here used as main light) and one white umbrella in a travel kit for € 116,00 the extra white umbrella retails for € 23,00

Now if you don’t like the accent lights you can always place two large flags between your model and the umbrellas and take away the accent lights.

And how about just 2 lights?

You might wonder, can we also do this (getting a white background and floor) with 2 strobes and 2 umbrellas?
That’s the nice thing about umbrellas.
The disadvantage is that the light spreads around very easily. But that’s also the advantage if you know how to control it 😀

Now when you use one umbrella on the back the accent light will of course just be on one side. But when you look at the end result it’s absolutely a setup that you can use.

Conclusion of white backgrounds

White backgrounds can always be tricky due to the amount of light that spreads everywhere.
But by using the right light modifiers and placing them correctly in the scene a lot can be done for a very low budget.
And let’s be honest. These images are straight out of the camera with just a little boost in contrast, as you can see the background is almost pure white and the only thing you have to take out are the seams of the plexiglass, which in most cases can be done in seconds.

So the next time you need a pure white background, why choose the expensive and difficult route?
Just use three or two umbrellas and some plexiglass and deliver images almost straight out of the camera.

check out the video about the Rogue Umbrella’s

 

Or this short, also with model Claudia about the Umbrella 

A videotip about using the FlashBender XL Pro (Frank Doorhof edition)

The FlashBender XL Pro is my favorite light shaper

I’ve been using the Rogue FlashBender for many years. And without any doubt, it’s one of the most flexible light shapers.
You can use it as a snoot, bounce card, softbox, and even a striplight with grid.

The FlasBender was designed for speedlights and round strobes. So,  it fits most of the hybrid strobes on the market like Godox, Geekoto, Profoto, Westcott, etc.
Besides all the different ways to use it, the main advantage for me is that there is always room for a FlashBender or two. It folds up very flat so it will mostly just sit on top of my gear in my backpack.

If you also want a FlashBender, or one of the other Rogue products check
Rogueflash.com / Rogueflash.nl

And for the Dutch customers get the Rogue products and the FlashBender XL Pro here.

Because we are the Dutch distributor for Rogue we also have a Dutch version from this video.

A different background for a totally different look

A Different background for a totally different look

Of course, we all know that changing the backdrop can create a different feel or look. Different backdrop and same styling
But somehow it also always triggers my creativity. We used the same styling.
Model and styling: Nadine
Backdrops: ClickBackDrops
Strobes: Geekoto

Just a backdrop or more?

For me, a backdrop is not just a pattern or something to fill up the space behind the model. I always try to make the backdrop a vital part of the shot. When I want something edgy I’ll often go for a more distressed wall look, when I want something more classical…. mmm maybe something with old curtains?

Well luckily for you guys we did just that with our model Nadine.
We decided to keep the styling and lighting idea roughly the same but change the backdrop.  As you can see even Nadine poses differently. My position is different and the end result is totally different.

Now this might seem logical. But often it’s forgotten that when you really blend background and model together ON SET you get a much more “organic” and “real” result. Not just because the shadow and light play on the backdrop. But also because both model and photographer are “inspired” by the results coming in.

People often ask me if I’m afraid that AI will replace all backdrops?

No, I’m not.
Yes it will replace it for some people, and the possibilities are limitless. But it cannot replace the shadow play, and inspiration the photographer/model experience during the shoot. The shadows could maybe be replicated but you would need a proper knowledge of lighting in the first place and an above-average knowledge of Photoshop to make it 100% convincible.

Let’s first take a look at the first set we did with Nadine.
Different backdrop and same styling. In this picture we use the Black Wash

Buy the ProFabric Black Wash Backdrop in our store (8,92’x8,92′ or 272x272cm)

I just love the way the backdrop seems to add a sensation of movement to the images.
This was shot the day we got the backdrops in so I didn’t use them before 😀

As you can see I played with different looks in tinting, posing, and color/BW.
But there is a certain feel to the images.

Now let’s change to an other backdrop. Same styling, but different look

Now this backdrop is officially unavailable in ProFabric, but I loved it so much they made a custom order on Pro-Fabric (which you can now also order). And as you can see the change is not just the backdrop 😀

Different backdrop and same styling Different backdrop and same styling Different backdrop and same styling, in this case the Theater Curtain on ProFabric

See the backdrops we have in stock. 

 

Check out the video of a styled photoshoot with Nadine, where I used AI on the backdrop

Read the blog about the backdrops with isolation blankets