Tag Archive for: photoshoot

Mixing ambient/available with strobes

/in , /by

A situation most photographers encounter many times is mixing ambient/available light with strobes.
There is however a pretty simple rule you can always use to remember how to influence the look of a scene.

Shutter speed controls the available light
Aperture is the flash
ISO stays the same

If you change the ISO you have to change the aperture (because this is fixed pulse from the strobe).
By changing the shutter speed you can let in more or less ambient/available light.
This way you can make a background outside darker (faster shutter speed) or lighter (slower shutter speed) while the exposure on your model (the flash) stays the same. Do remember this is of course with manual flash with ETTL this works slightly differently.

Also remember that there is a point where the ambient/available light can actually over power the strobe, especially outside when working with fill-in flash this can happen quite easily, that’s why I always advise to setup your strobes on full power first and lower the output by counting (if your system has 1/10th or 1/3rd digital settings and is reliable). If you change the shutter speed you have to remember that if you double or halve the shutter speed this is ONE full f-stop so if you know your aperture and the combination of ambient and flash you actually can very quickly calculate when the ambient is higher that the flash. If for example the setup is f11 on the model on 1/125 and you overpower the ambient with 2 stops, you know that when you shoot on f11 1/60 you are now overpowering the ambient with just 1 stop.

This comes in very handy when you start adding constant lighting to your scene like in these examples.
You can actually (to a certain level) control how much the lightbulbs emit, or how far they blow out.
I love using the Elinchrom ELCs for this because they can go down REALLY low in power, and that’s awesome for mixing them with this kind of light.

For this setup we used one strobe on the model and one blue gelled strobe on the back for the smoke effect. The chandelier was powered by 230V 😀

Mixing light sources can be incredibly fun but also a bit difficult at first. Also take into account that some light sources have a different color temperature (to be exact EVERY light source has a different color temperature, that’s why we use the X-Rite color checkers), you can solve this by gelling the strobes, or…. just leave it and play with it like I did in these shots, I love the cool hues you can get this way.

As a rule of thumb:
Outside light : no correction
Tungsten : Amber colored gels
Fluorescent : Green colored gels

Or find the proper CTO gels, you can of course also stack gels, I always advise to by them not to heavy and get two, this way you can stack them together if necessary.

Model : Danique
Dresses (black) by Sinister

Danique June 17 2016 2441

Danique June 17 2016 3408

The best locations and the best light…. are what you do….

/in , /by

We all know that a good shot consists of good lighting and a great location right?
However that doesn’t mean you have to travel for that great shot, actually the best shots can be right around the corner. The main problem is that we see the locations close to us way to often to actually register as something that could be interesting for a photoshoot. If we would see them just once they might seem much more interesting than they do in every day life.

 

When we changed locations for our studio I clearly told everyone that the area behind the studio (out of sight) could not be changed and I wanted to let “nature” just run it’s course, if we have something old and “rustic” we don’t throw it out, we store it there and just place it somewhere where we can use it as a location to shoot, we even have a sea container there to use.

 

The next shots were all done in a very fast outside session with just the sun as light source.
Editing is very minimal with just some tinting and a little bit of MacPhun Intensify.

 

So the next time you are looking for a location… make sure to also check your local area, and house area. And when you own a studio building…. why not make a “mess” outside (as long as people don’t see it from the road). Also remember that the sun will actually be a great light source with great contrast, if it’s a bit too harsh you can always use some diffusion material between the model and the sun, but in all honestly I often just shoot it as is, I just love those hard shadows and popping colors.

 

Model/Styling : Nadine

Nadine Juni 12 buiten 2015 0010

Read more

Movement with Kirsten

/1 Comment/in /by

As you probably know I love shooting motion, and what is better for that than working with a dancer (or dancers).
Last week Kirsten visited our studio for some new shots, and today I can share some of that shoot.
All shots/jumps are real and no Photoshop was used except for tinting and sharpening.

Kirsten May 1 2015 0095

Read more

I want to break free…..

/2 Comments/in /by

Today a special blog post.
First of all it’s my birthday 😀 (44 already pffff) but second of all I wanted to post this one today for another reason.

People that know me know that I’m a huge Queen fan so when our friend Chaim and me talked about him looking a bit like Freddie we actually came up with the idea from the shoot you’re gonna see today.

 

When we came up with the idea to do a Queen inspired shoot we first had to determine on what to shoot.
Very quickly it was decided we would do a tribute to “I want to break free”.
Styling wise this was of course already a challenge, getting high-heels, clothing etc. but most of all it appeared to be a challenge to get the vacuum cleaner, but eventually we found it so we could plan the shoot. And last weekend it was time to shoot it so today we can show you the results.
Styling : Nadine
MUA : Christa
Freddie : Chaim

I want to break free May 1 2015 29357

Read more