Tag Archive for: light

Tip for light meters and ambient light

/in , /by

Often I get messages from people that their light meter is not reliable outside, inside no problem but outside…..
Do always remember that outside there is also ambient light.

Let’s say you have a small flash system (the system flashes like Canon/Nikon/Sony) and your shooting full manual and get a reading of F5.6 inside, now when you go outside a day later and you get F11 don’t expect that the strobe is actually on F11, it could very well be that the strobe is outputting only F8 or lower.

8 Juni 2014 Marie 0066 1

The meter works very simple
When you press the button to meter in strobe mode (the lighting bolt) it will actually wait for a pulse and start metering, now the pulse from the strobe is registered of course and the meter does it’s work BUT if the ambient light (on the giving shutter speed) is higher than the strobe the meter will of course give you the F stop for the ambient light (since it overpowers the strobe).
So the next time you’re outside and want to check if your strobe is registering, or if you suspect a problem…. first set the strobe on the lowest setting and meter, now start raising the strobe and if the meter value doesn’t change you know you’re metering ambient (or in other words, ambient is overpowering the strobe).

 

So don’t bash the meter, understand how it works 😀

now let’s look at some solutions….

Read more

Light as story teller

/in /by

Tip :
Light as story teller



A lot of you probably already know that I’m always teaching my students not to only create good light but also try to add something different to a picture, I call this “story telling”. During the New York workshops I hit the jackpot by shooting the almost perfect example.

One of my students, a really nice guy with an open face (friendly) stood in front of my camera during the part of the workshops where I shoot some head shots from the students to let them experience what it means to be in front of the camera.

I will use whatever light is available for these shots and in this case it was only a varistar wide reflector for the Elinchrom, they already packed all the rest of the gear. It’s actually only meant for the realization what a model goes through in front of the camera, if we end up with something the students can use that’s an added plus 😀

By angling it I got it to create a nice vignette on the background, but… the light was relatively high up, no problem for the purpose of this segment, but when step a bit too close something “funky” happens, a lot of contrast in the face.

Normally you end up with a deletion of the shot and ask the subject to stand one step further away, but in this case……

Workshops 5thfloor NY Headshots 29-30 August 2014 (70 of 100)-Edit

Read more

Many different looks from one setup

/1 Comment/in , , /by

Often I’m asked what kind of setups I use and what kind of modifiers.
What people often don’t realize is that with only one modifier you can chance a lot just by playing with the angles and controlling the contrast/lightfall off. In fact placing a light closer or further away also makes a huge impact on the image look, add to this the option to feather a light source (using the sides of the light) and you know that there is a lot possible with one modifier and light.

 

It gets even more interesting when you are combining two strobes and for example add a gel to one of them.
During the workshop this weekend I made a setup like this with our model Lennaa and decided it would be a cool thing to share on the blog.

 

I started out with one strobe with a red gel.

Lenaa Juli 25 20142025

To get a bit more “punch” in the image I added another strobe without gel under the same angle to mix the two.

Lenaa Juli 25 20142035 Read more

Light can be very simple

/1 Comment/in , /by

As photographers we have to realize that light is our language, it’s the paint we work with to tell the story.
Now for most photographers light is something they can control as long as it’s something familiar and something that…. well has a label which states what it does.

 

Light however can be so many things, in my opinion (and I really mean this) there is no light source that can’t be used to create a nice image. So during a workshop I got some questions about different light sources and we did a part of the workshop with just one (well actually 3) light source, an old chandelier. The only thing we modified from this chandelier is that we use 100W light bulbs instead of the much lower in power bulbs you would normally use. This helps to keep the ISO a bit lower.
Oh and don’t worry if your camera shoots on ISO1600 or ISO2000, when you zoom in you indeed see some noise, but trust me… when you print or publish for the net you won’t see the noise anymore, or at least it won’t bother you.

 

Now the fun thing about shooting with these kind of light sources is that you really learn to control your light and see what light does, for example placing it closer to the model will give you totally different look than when you place it further away. Today I show you two sets we did with the chandelier. On the first one we had the lights really close to the model while on the last set my assistent actually swung the lights above the model (Manon). As you can see… the same light source but two totally different looks.

Manon Juli 5 2014 (82 of 153)_DxO

Read more