Tag Archive for: product photography

Sometimes 15 minutes is enough for a commercial photo shoot

/in /by

Planning is everything in a photo shoot

Sometimes it doesn’t go as planned. Our planning for this commercial photo shoot was good, but it ended in only 15 minutes shooting.
Recently we did a photoshoot for the new Sparks sunglasses collection.
The idea was to shoot the series in Amsterdam, but due to the weather, we decided at the last minute to change the location to Emmeloord so we would have the studio as a backup. and once again we found out that planning a for commercial photoshoot can go differently than you thought.

Rescheduling was impossible because the tickets were already bought from the UK to the Netherlands and back. So we decided to go for it.

Oops… planning for a shoot can go wrong

When the client arrived we started by planning the whole shoot, and to our horror, we found out they had to be back in Amsterdam in….. 2 hours.
This meant we had to drive to the location (Urk), do the photo shoot, and drive the client back to Lelystad, and from there to Amsterdam. In the car to Urk I, actually for the first time, realized I had exactly 15 minutes to do the whole shoot.

Seeing our client was here all the way from the UK I wanted to give them more than they asked for, but 15 minutes… would be a new record 😀

Flash and natural light, ETTL rocks

I’m not a big fan of ETTL but luckily our Geekoto strobes support both HSS and ETTL. So I decided to shoot almost everything in 3 fold. One time natural light, immediately after that with strobes as a fill-in light, and then the final shot with a more day-to-night look.

When you set this up correctly it’s possible to shoot 3 different looks in one setup. Just move your body a little bit or change positions. And it almost looks like you did a lot, while in essence, it was a short session.

For the location, I chose the harbor of Urk. Because we only had 15 minutes I knew that from a low angle, I could get a nice sky. But with just changing my own position I can shoot Urk in the background or all the boats in the harbor. And when walking back the killer-whale and some other nice locations where you can just stand and shoot.

Annewiek was functioning as my VAL *(Voice Activated Lightstand) and held the GT200 with the S26 softbox under different angles during the shoot, again to maximize the amount of different “looks”.

In this case, I shot the whole series with ETTL and HSS. This meant I could work very fast on location. But the downside is that all photos needed slight adjustments in Lightroom. Not a big deal but personally I’m a lightmeter guy 😀

Anyway, enough talk. Although our planning for this commercial photo shoot was different, we got great results, and the client is satisfied.

Here are some images from the session. It’s not everything I shot, but it is a nice overview.

Planning for a commercial photo shoot Planning for a commercial photo shoot Planning for a commercial photo shoot Planning for a commercial photo shoot Planning for a commercial photo shoot

 

Sparks Sunglasses Website 

See the video of the workshop outside, where we also used the Geekoto.

check this post of the shoot with Nadine with Sparks Sunglasses 

A kind of different product photography, shots from guitar pedals

/in , /by

A kind of different product photography, shots from guitar pedals

Most of the posts we do online are from model photography. But product photography is also one of the services we offer our clients. Most of the time, the model shots are however a lot more interesting to post. But sometimes we also show you some of the products we shoot, when it’s special.

Hobby vs business

I always say I’m a lucky guy, every day I can do what I love most, create images. But sometimes I’m double so lucky when I can combine two of my passions.

I’ve known RJ-amps for a few years now and he can do wonders with tube amps but also builds great guitar pedals. When I brought my amp in I got two brand new pedals to play with which will be released later this year. And of course…. and he knows that…. I couldn’t resist to take some images.

Now we also took some of the more boring white backgrounds but when we do product shoots I also always like to add some “special set” shots. With handbags for example. We build a small set fitting the brand and took some shots in there, with fancy lighting. In most cases, we do this for free (and fun) but clients often end up using those images also.

How I shot this product, the guitar pedals

For this series I decided to shoot it at home with a combination of a Lumecube with a snoot and two Nanlite led tubes on the side.
The challenge was to get the Lumecube in exactly the right place, but luckily we could use the K&F concept tripod I’m using for my iPhone video setup. This is an awesome tripod because it can act as a boom arm, making it ideal for shoots like this or using phones in video setups.

Here is the behind-the-scenes setup for both pedals.

A kind of different product photography, shots from guitar pedals

A little bit of set styling

The reason I shot this at home was mainly because it was the best location 😀
This is the area where I create my music and also host live streams when I do seminars for clubs or Digital Classroom episodes without live shoots.

I love the carpet here (somehow most guitarists seem to love them) so I wanted to use that as my “base”
Because it’s a pedal I chose this vintage-looking amp because it’s pretty neutral-looking and stands close to the floor. So there is no problem fitting it in the frame.

Of course, you also need a guitar. Here I chose a custom-built guitar for the nice wood look which I think works great with the color of the amp and the carpet. Also, the finish has a very high gloss which makes it harder to light. But the effect when done right makes it possible to use just a little bit of light to see some details.

For some “fill,” I used my favorite-looking microphone, a nice Marantz Ribbon mic.

Lighting

As mentioned I’m using the Lumecube with a snoot and two Nanlites tubes on the left and right.
I love using accents with red and blue because both are on the same axis in the colorspace they blend together really nicely and both are also the so-called “emotion” colors so for me personally it’s a combination I use a lot.

Placing the lights is vital if you want details in the guitar without getting too much glare. However, around the edges, I did want just a little bit of reflection making the guitar stand out. After finding the right spot you can fine-tune the spread by just turning the tube very slowly and keep looking through your camera.

Ok… let’s show the results.
I did use just a little bit of BorisFX for special effects.
Get a 15% discount on BorisFX by using our link.

A kind of different product photography, guitar pedals A kind of different product photography, shots from guitar pedals

 

PS: if you like this blog about product photography (from guitar pedals), let me know! Find me on social media.

We got the new smokemachines available and they are awesome

/in /by

Awesome portable smoke machines without breaking the bank

During a recent broadcast in our digital classroom I was playing with the new lensgo smoke machines.
These small smoke machines are great for product photography and via special adaptors (all in the box) the are even working great for model photography.

Normally we are using much larger smoke machines and although they are great for backgrounds they are not that good for adding subtile smoke effects or smoke in a specific place. The LensGo smokemachines are much more flexible and as you can see during the broadcast you can also add some local smoke effects like on a mirrorball for some mystical effects.

Because you can take the smokemachines with you in your photo bag and have smoke wherever you shoot I think everyone should have one…. so we decided to add them our webshop.

You can find the smokemachines and accessories on your webshop.
It will be the perfect holiday gift for a loved one (or yourself).

During the broadcast I’m showing the different accessoires, including the awesome “floating smoke”.
And of course you can see how I shot those images with Lois.