mixing Archives - Page 2 of 2

Many different looks from one setup

July 26, 2014/1 Comment/in blog, Light meter, Visions and technique/by Frank Doorhof

Often I’m asked what kind of setups I use and what kind of modifiers.
What people often don’t realize is that with only one modifier you can chance a lot just by playing with the angles and controlling the contrast/lightfall off. In fact placing a light closer or further away also makes a huge impact on the image look, add to this the option to feather a light source (using the sides of the light) and you know that there is a lot possible with one modifier and light.

It gets even more interesting when you are combining two strobes and for example add a gel to one of them.
During the workshop this weekend I made a setup like this with our model Lennaa and decided it would be a cool thing to share on the blog.

I started out with one strobe with a red gel.

Lenaa Juli 25 20142025

To get a bit more “punch” in the image I added another strobe without gel under the same angle to mix the two.

Lenaa Juli 25 20142035 Read more

Mixing strobes with tungsten

July 10, 2014/1 Comment/in blog, Visions and technique/by Frank Doorhof

There will be that moment where you have to mix two different light sources in a scene.
Now normally it’s common to gel the strobes to match the color temperature of the other light source, but sometimes it can be very interesting to keep the color temperature different.

In this shot (shot during a glamour workshop) I shot our model Lenaa on the chair and lit her with the 70cm deep octa and a custom grid from Honeycombgrids the tungsten lights on the back are in fact 100W bulbs. I made sure that the light sources didn’t really “overlap” but that the tungsten had free play on the background, this way the tungsten lights look really nice and warm and it gives a nice glow to the background. The suitcases gives the shot some extra dimension.

When shooting something like this, do make sure that you put the strobes on the LOWEST possible power setting, this way you can actually see the tungsten lights. If you meter everything on 1/125 you can still open up more to let in more of the tungsten bulbs (1/60 or even 1/30). Always remember that the aperture in these cases control the strobe and the shutter speed the tungsten lights.

Lenaa Juni 20 2014 38 1