Tag Archive for: tip

Some colourful lights in the set

/in , /by

Adding continuous lighting is always fun

In todays blog post some images we shot during a workshop with out model Trista.
I’m using a mix of strobes and continuous lighting here.

Due to the reflective floor (plexiglas) and the mirror the angles under which you can shoot are slightly limited.
I loved this angle because it adds a bit to the story telling part of the shot.

Hope you like the results.
The set it build with isolation blankets we had left from our new roof instalment.
A good set doesn’t have to be expensive 😀

Over time you will collect things that you can always combine during photoshoot. Some people will decorate their whole house with little sets, in our case we just collect a lot of “junk” at flea markets, attics etc. we are always interested in things we can someday use. The only problem is room.

Always try to see possibilities, like in this set we used the isolation blankets. There were just laying around so why not use them.
I’m pretty sure you have a lot of stuff in your home that would make awesome set pieces.

Build a set for less than $10 and use it many different ways…. yeah I’m Dutch

/in , /by

Of course I would love to spend thousands on elaborate sets but let’s be honest, we can’t.
So it became a challenge to do everything as cheap as possible and maximise the use.
And I think we broke all records with this one.

A while ago you probably saw the blog post about the set we build with rescue blankets, well those blankets also have a silver side.
So today in the blog the results from a recent workshop with our model and awesome stylist Nadine.

During the workshop I gave the attendees a simple, assignment.
This is the set, go crazy.
you have 10 minutes.

Of course I had to put my money where my mouth is, so after the 10 minutes I also did a try.
All the shots you see now are shot within that time frame, if you deduct the explanation of course.

I started relatively simple.

Here I’m using a Geekoto GT400 with the Nanlite Fresnell lens.
The Fresnell has quickly become my favourite light modifier for high contrast images.
I did use Fresnells in the past but hardly during workshops, they were simply put too expensive and I love to teach setups that you can also recreate yourself without breaking the bank. But the Nanlite Fresnell has a super friendly price, so I’ve been using a lot now 😀

Now in this shot you only see one light, but on the side there is a Geekoto GT250 with a rogue omnidirectional dome.
As soon as I turn that one on I have my second set, which as you probably agree upon is “a bit” different.

But because 10 minutes is actually a lot of time we moved the strobe to the backside of the set and aimed it down.
I’m now using a slight magenta coloured gel under the dome, the reason I’m using magenta is that with the tinting later on it will give me a nice “reddish” tint.
You can also use a red gel but after tinting it this way it could be a bit too much and clip some red.

From this point on I just started experimenting with the output of the gel and under which angle I shot.
Also getting slightly closer to Nadine and using the wide angle to enhance the position of the legs.

It’s always a cool effect to use a wide angle and let the model point her toes towards the camera.

Of course the exposure you meter with a light meter is the “perfect” exposure, but sometimes it’s not the “perfect” exposure you want in your images.
In these images I loved the darker look you see above, but what if…. you just open the aperture and add a lot of extra spread on the background by changing the angle of that strobe.

Indeed without changing a lot you can have a totally different look

But we are not done yet with our challenge.
Now that I like the total look, I’m ready for some close ups.

Angles change everything

And because I’m standing now anyway, let’s throw in a higher angle and a really low one.
Using different angles are without a doubt one of the easiest, quickest and best way to totally change the look and feel of a shot.
As you can see here, the impact is pretty obvious.
Also because I’m shooting into the light in the lower angle shot the KF concept Black diffusion filter really does it’s work.

Adding lights that are not strobes

As you can probably see there are some lights in the Chrismas tree, but so far I have to yet turned them on.
The simple reason was that I didn’t like them in this set, but because we had a few seconds left, we decided to turn them on.
The only thing you have to keep in mind is that when you shoot with strobes you are shooting with a lot of light and a pulse, so as long as you stay below 1/125 there is no problem in the studio (we call this the X-sync).

Because the Christmas lights are very low in output, I had to lower the output of the strobes (you can quickly do this via the remote control) and turn on the lights. Now you can use the shutter speed to let in more or less of the continuous light, the flash will stay the same (turn of your modelling lights) but the Christmas lights will show up more intense the longer the shutter speed.

We ended up with this shot.

As you can see it’s possible to shoot a lot of different looks from one set.
Just make sure you setup everything in advance so during the shoot you can quickly change things around.
For me this often means I’m using the same mainlight. But will change my accent lights around a lot, sometimes just via the remote control, but also position wise, and of course walk around my model a lot.

1o minutes really is a long time if you set everything up correctly.
But preparation is key. When the model is not yet on the set your whole idea should be in your head, and tested.
This will keep the model interested and fresh. and in the end your client happier.

Feel free to reach out with questions.
We really appreciate a share on social media.

Some fun images with Nadine and crazy styling

/in /by

Today just some images I shot during a workshop with Gabe and Nadine.
With sets like this it’s always fun to experiment with different angles and expressions.
So walk around your model and sit down, or stand on a ladder, make it fun and creative.
And don’t be afraid to use your wide angle for some nice leading lines.

Oh… and even during lunch keep shooting 😀

Working on location and what does flash do?

/in , /by

During the workshop on location in Emmeloord with our model Claudia the theme is to find locations that might look boring and make them interesting enough for some cool shots. in my opinion this is one of the best things you can do to train yourself to create better images.

The reason most people don’t shoot images close to their home is probably that they see it every day and don’t realise anymore that some locations can be great to shoot images in or against. Every day I walk Chewie I see locations where I think “this would be nice to place a model” but somehow you always travel to cool locations to do the same while in essence you could take the same kind of images close you your own location.

Now of course we do want to introduce also some interesting lighting, because if you just shoot something with ambient light it’s boring right?
Or maybe not….
So during the workshop we actually run through several different lighting solutions.

So today let’s take a look at what you can do with just an open parking place.

Let’s start out with ambient light only.

A low angle and a standard preset I created in Luminar AI (you can get those on frankdoorhof.com/shop)

Now let’s add a just a slight amount of flash.
I’m using a Hensel Porty with a 14″ reflector here and to get this effect you really don’t need a lot of power, in essence I’m overpowering the ambient by just 1-1.5 stops.

With retouching you could get something similar quite easily.
Now one of the limitations of shooting with the Hensel Porty is that you are limited to the X-sync which in most cases lies between 1/125 and 1/200. So you will mostly shoot on smaller apertures when using a lot of power. This is why I’m using a variable magnetic ND filter on my lens when shooting with the porty system outside.

I’m using the K&F concept version which you can find in the Frank Doorhof kit which includes 2 Black diffusion filters (1/4 and 1/8) and the variable ND filter, all magnetic of course.

Ok, so now let’s add a lot of light.

Here I’m totally overpowering the ambient light and also chose a different angle to enhance the contrast even more.
One might say…”hey this is cheating because we don’t see the sky anymore”
So of course I also shot some with the sky included but we did move the set a bit to make the series more varied.

This is something I always highly recommend.
If you shoot all images from the same angle and in the same location it can be very nice but also a bit boring, and you don’t have to travel or even walk to another location, it’s often a matter of choosing a location where you can shoot from different angles and create something new with every angle. It doesn’t only speed up your workflow but also give your client much more different images for the same price, so they will be much more willing to hire you again for another job.

As you can see there is a huge difference between the first and last images.
However in reality it’s “only” the difference in lighting and by choosing different angles.

So the next time you are shooting on location look around for areas that can be shot from different angles and don’t be afraid to shoot with or without strobes.